Bench and production drilling |
|
Каталог >> Каталог бурового инструмента >> Bench and production drilling |
|
Section content:
 |
 |
 |
 |
 |
| -6076-67 Drop Center bit with ballistic buttons. Standard skirt. Designed for medium hard rock. Bits with ballistic buttons perform especially well in non-abrasive or medium abrasive rock formations. |
-607645-67 Drop Center bit with ballistic buttons. Retrac skirt. To be used in the same applications as -6076-67 when you have rock formations that also create hole deviations. |
-6076 Drop Center bit with spherical buttons. Standard skirt. Perfect in slightly more abrasive formations where there is accelerated button wear or in medium to hard rock when ballistic buttons have a tendency to break. |
-6076-45 Drop Center bit with spherical buttons. Retrac skirt. Use in the same applications as -6076 when you have rock formations that also create hole deviations. |
-5076 Flat front bit with spherical buttons. Standard skirt. Ideal for medium hard rock when the rock formation causes heavy gauge wear on the bit. Can also be used in very hard and abrasive rock formations. |
 |
   |
  |
| -5076-45 Flat front bit with spherical buttons. Retrac skirt. To be used in the same applications as -5076 when you have rock formations that also create hole deviations |
-5127-21, -6089-21-67, -6076-21-45-67 Model -21, a heavy duty bit with larger gauge buttons. Flat or drop centre front. Retrac or standard skirt. Ballistic or spherical buttons. A new bit design for hard to very hard abrasive rock. The asymmetrical button pattern gives excellent rock crushing. A shorter head and larger clearing angle allow for better flushing of cuttings. Model -20 is used for the same applications. |
-6102-36, -6089-35-67 Model-35 and Model-36 guide bits for the TDS tube drilling system The Model -35 and -36 guide bits should be used in rock formations that create hole deviations. |
 |
  |
| Soft rock bits -66 Full-ballistic button bits. The two types of full-ballistic button bits, model 5xxx -47-66 and model 6xxx-21-66 are developed specially for drilling in soft formations. The penetration rate is very fast due to the high button protrusion. Excellent flushing concentrated to the front |
Insert bits Cross- and x-type bits. Traditional chisel bits in cross-and x-type formations for extremely abrasive rock. Ideal for soft formations that cause snakeskin problems for carbide. Produce straight holes. X-type bits are used for larger hole dimensions. |
-5XXX - Flat face button bit, - 6XXX - Drop centre button bit
- XXXX - 67 - Ballistic buttons, - XXXX - 66 - Full-ballistic buttons, - XXXX - 45 - Retrac skirt
Please observe that all button bits are manufactured oversized 1.0-1.5 mm, meaning that for example a 45 mm bit is at least 46 mm as new and a 89 mm bit 90 mm. This is done because of the fast initial wear on button bits. When it is of importance, also consider that the hole is always 1-3 mm bigger than the bit dimension depending on rock formation.
R25 (1")
Drill Bit: Button bit
Spherical buttons| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 38 41 41 45 45 |
102-5038-27,39-20 102-5041-27,39-20 102-5041-56,39-20 102-5045-27,39-20 102-5045-56,39-20 |
7 7 6 7 6 |
5x9, 2x7 5x9, 2x8 4x9, 2x9 5x11, 2x8 4x11, 2x9 |
30 35 35 30 35 |
1, 1 1, 1 2, 1 2, 1 2, 1 |
0.5 0.6 0.6 0.6 0.6 |
| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 38 41 41 |
102-5038-27-67,39-20 102-5041-27-67,39-20 102-5041-27-30-67,39-20 |
7 7 7 |
5x9, 2x7 5x9, 2x8 5x9, 2x8 |
40 40 40 |
1, 1 1, 1 1, 1 |
0.6 0.6 0.9 |
Drill Bit: Cross-type bit
| Diameter (mm) | Part No. | Width | Height | Flushing hole (Side, Centre) | Weight approx (kg) |
| 38 41 45 51 |
102-7038-44, 20-17 102-7041-44, 20-17 102-7045-44, 20-17 102-7051-38, 02-17 |
10.3 11.1 11.1 14.0 |
19.5 20.0 20.0 22.0 |
4, 1 4, 1 2, 1 4, 1 |
0.6 0.7 0.8 1.1 |
Extension rod
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 1220 3050 |
202-0212-C02 202-0231-C02 |
3.7 10.1 |
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 915 1000 1220 1525 1830 2435 3050 |
202-0309-C02 202-0310-C02 202-0312-C02 202-0315-C02 202-0318-C02 202-0324-C02 202-0331-C02 |
202-0331-SH.03 |
3.3 3.9 4.5 5.7 6.9 9.2 11.9 |
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 610 1220 |
202-0306-MF-C02 202-0312-MF-C02 |
2.6 5.0 |
Coupling
| Diameter (mm) | Length (mm) | Part No. | Weight approx (kg) |
| 33 35 |
150 150 |
302-0033,00 302-0035,00 |
0.5 0.7 |
Shank end rod
22 mm 7/8" hex. x 108 mm (41/4") shank 25 mm (1") thread
| Length (mm) | Part No. | Seal part No. | Weight approx (kg) |
| 265 610 760 1000 1200 1830 2435 3200 3600 |
502-0103-06-C02 502-0106-06-C02 502-0108-06-C02 502-0110-06-C02 502-0112-06-C02 502-0118-06-C02 502-0124-06-C02 502-0132-06-C02 502-0136-C02 |
9232 9232 9232 9232 9232 9232 9232 9232 - |
1.2 2.3 2.9 3.4 4.5 6.1 7.9 10.4 11.8 |
25 mm 1" hex. x 108 mm (41/4") shank 25 mm (1") thread
| Length (mm) | Part No. | Seal part No. | Weight approx (kg) |
| 255 | 502-1203-C02 | 9150-08 | 1.4 |
25 mm 1" hex. x 159 mm (61/4") shank 25 mm (1") thread
| Length (mm) | Part No. | Seal part No. | Weight approx (kg) |
| 255 3200 |
502-1503-C02 502-1532-C02 |
9150-08 9150-08 |
1.5 13.2 |
28 mm 11/8" hex. x 159 mm (61/4") shank 25 mm (1") thread
| Length (mm) | Part No. | Seal part No. | Weight approx (kg) |
| 2700 | 502-2127-C02 | - | 11.2 |
R28 (11/8")
Drill Bit: Button bit
Spherical buttons| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 41 41 43 43 45 |
107-5041-27,39-20 107-5041-27-30,39-20 107-5043-27,39-20 107-5043-27-30,39-20 107-5045-37,39-20 |
7 7 7 7 9 |
5x9, 2x8 5x9, 2x8 5x9, 2x9 5x9, 2x9 6x9, 3x8 |
35 35 35 35 35 |
1, 1 1, 1 2, 1 1, 1 1, 3 |
0.7 0.9 0.7 0.9 0.8 |
Ballistic buttons
| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 41 | 107-5041-27-67,39-20 | 7 | 5x9, 2x8 | 40 | 1, 1 | 0.6 |
Drill Bit: Cross-type bit
| Diameter (mm) | Part No. | Width | Height | Flushing hole (Side, Centre) | Weight approx (kg) |
| 38 41 41 45 |
107-7038-44, 20-17 107-7041-44, 20-17 107-7041-44-30,20-17 107-7045-44, 20-17 |
10.3 11.1 11.1 11.1 |
19.5 20.0 20.0 20.0 |
1, 1 4, 1 4, 1 4, 1 |
0.6 0.7 0.9 0.9 |
Extension rod
| Length (mm) | Part No. | Weight approx (kg) |
| 3050 | 207-0431-C,02 | 15.0 |
| Length (mm) | Part No. | Weight approx (kg) |
| 3050 | 207-0431-MF-C,02 | 15,7 |
Coupling
| Diameter (mm) | Length (mm) | Part No. | Weight approx (kg) |
| 40 | 150 | 307-0640,00 | 0.9 |
R32 (11/4")
Drill Bit: Button bit
Spherical buttons| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 48 48 51 51 51 51 57 64 64 64 64 76 76 |
103-5048-27,39-20 103-5048-37,39-20 103-5051-27,39-20 103-5051-37,39-20 103-6051,49-20 103-6051-45,49-20 103-5057-20,39-20 103-5064,49-20 103-5064-45,49-20 103-6064,49-20 103-6064-45,49-20 103-5076,49-20 103-6076-45,49-20 |
7 9 7 9 9 9 9 12 12 10 10 12 13 |
5x11, 2x9 6x10, 3x8 5x11, 2 x 10 6x10, 3x9 6x10, 3x9 6x10, 3x9 6x11, 3x9 8x10, 4x10 8x10, 4x10 6x11, 3x10,1x10 6x11, 3x10,1x10 8x11, 4x11 8x11, 4x11,1x11 |
35 40 35 40 30 30 35 40 40 35 35 40 35 |
2, 1 1, 3 2, 1 1, 3 -, 3 -, 3 -, 3 -, 2 -, 2 -, 3 -, 3 -, 2 1, 4 |
1.0 0.9 1.0 1.0 1.0 1.2 1.1 1.5 2.2 1.5 2.2 1.7 3.5 |
Ballistic buttons
| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 48 48 51 51 51 54 64 |
103-5048-37-67,39-20 103-5048-37-30-67,39-20 103-5051-37-67,39-20 103-5051-37-45-67,39-20 103-5051-37-30-67,39-20 103-5054-37-67,39-20 103-5064-67,49-20 |
9 8 9 9 9 9 12 |
6x10, 3x8 6x10, 2x8 6x10, 3x9 6x10, 3x9 6x10, 3x9 6x10, 3x9 8x10, 4x10 |
40 25 40 40 40 40 40 |
1, 3 1, 3 1, 3 1, 3 1, 3 1, 3 -, 2 |
0.9 1.2 1.0 1.1 1.6 1.0 1.5 |
Full-ballistic buttons(Soft rock bits)
| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 48 51 |
103-5048-37-66,39-20 103-5051-37-66,39-20 |
9 9 |
6x9, 3x9 6x10, 3x9 |
40 40 |
1, 3 1, 3 |
0.8 0.8 |
Drill Bit: Cross-type bit
| Diameter (mm) | Part No. | Width | Height | Flushing hole (Side, Centre) | Weight approx (kg) |
| 48 51 51 57 64 |
103-7048-38,02-17 103-7051-38,02-17 103-7051-38-45,02-17 103-7057, 02-17 103-7064, 08-17 |
14.0 14.0 14.0 10.3 10.3 |
22.0 22.0 22.0 19.5 19.5 |
4, 1 4, 1 4, 1 4, 1 4, 1 |
0.9 1.2 1.7 1.3 1.4 |
Drill Bit: X-type bit
| Diameter (mm) | Part No. | Width | Height | Flushing hole (Side, Centre) | Weight approx (kg) |
| 76 | 103-8076,08-16 | 14.0 | 26.0 | 4, 1 | 1,7 |
Extension rod
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 915 1000 1220 1830 2435 3050 3660 |
203-2509-C02 203-2510-C02 203-2512-C02 203-2518-C02 203-2524-C02 203-2531-C02 203-2537-C02 |
203-2524-SH.03 203-2531-SH.03 203-2537-SH.03 |
4.8 5.7 6.5 9.8 13.2 16.6 20.0 |
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 915 1220 1525 1830 2435 3050 3660 |
203-2509-MF-C02 203-2512-MF-C02 203-2515-MF-C02 203-2518-MF-C02 203-2524-MF-C02 203-2531-MF-C02 203-2537-MF-C02 |
5.5 7.3 9.0 10.6 14.0 17.1 20.7 |
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 1830 3050 |
203-2518-MF-90-C02 203-2531-MF-90-C02 |
11.5 19.3 |
Drifter rod
| Length (mm) | Part No. | Weight approx (kg) |
| 4000 4310 |
203-2540-03-C02 203-2543-03-C02 |
22.0 24.8 |
Guide rod
| Length (mm) | Part No. | Weight approx (kg) |
| 3050 3660 |
203-4731-MF-C02 203-4737-MF-C02 |
27.0 32.0 |
Coupling
| Diameter (mm) | Length (mm) | Part No. | Weight approx (kg) |
| 44 44 |
150 160 |
303-0044,00 303-0044-57,00 |
1.0 1.0 |
Guide tube
| Hole diameter (mm) | Tube diameter (mm) | Length | Part No. | Weight approx (kg) |
| 51-57 51-57 51-57 51-57 |
45 45 45 45 |
1220 1525 1830 3050 |
203-7112,10 203-7115,10 203-7118,10 203-7131,10 |
10.0 12.5 14.2 25.0 |
R/T38 (11/2")
Drill Bit: Button bit
Spherical buttons| Diameter (mm) | Part No. R38 thread | Part No. T38 thread | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 64 64 64 64 64 64 64 70 70 70 70 70 70 76 76 76 76 76 76 76 76 89 89 89 89 102 102 102 127 |
104-5064,49-20 104-5076,49-20 104 5089,49 20 |
135-5064,49-20 135-5064-45,49-20 135-5064-20,49-20 135-5064-21,49-20 135-6064,49-20 135-6064-45,49-20 135-6064-21,49-20 135-5070,49-20 135-5070-45,49-20 135-5070-20,49-20 135-5070-21-45,49-20 135-6070-21,49-20 135-6070-21-45,49-20 135-5076,49-20 135-5076-45,49-20 135-5076-20,49-20 135-5076-21,49-20 135-6076,49-20 135-6076-45,49-20 135-6076-21,49-20 135-6076-21-45,49-20 135-5089,49-20 135-5089-45,49-20 135-6089,49-20 135-6089-21,49-20 135-5102,49-20 135-5102-42-24,49-20* 135-6102-21,49-20 135-5127-42-24,49-20* |
12 12 9 10 10 10 10 12 12 11 11 10 10 12 12 11 13 10 13 13 13 12 12 11 13 12 17 13 19 |
8x10, 4x10 8x10, 4x10 6x12.7, 3x11 6x11, 4x10 6x11, 3x10,1x10 6x11, 3x10,1x10 6x12.7, 3x10,1x8 8x11, 4x11 8x11, 4x11 6x12.7, 5x11 6x12.7, 5x10 6x12.7, 3x10,1x10 6x12.7, 3x10,1x10 8x11, 4x11 8x11, 4x11 6x12.7, 5x11 8x12.7, 5x11 6x12.7, 3x11,1x11 8x11, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 4x12.7 8x12.7, 4x12.7 6x12.7, 3x11,2x11 8x12.7, 4x11,1x11 8x14.5, 4x14.5 16x12.7, 1x12.7 8x14.5, 4x12.7,1x12.7 18x12.7, 1x12.7 |
40 40 35 35 35 35 25 40 40 35 35 35 35 40 40 35 35 35 35 35 35 40 40 35 35 40 35 35 35 |
-, 2 -, 2 1, 1 1, 2 -, 3 -, 3 -, 3 -, 2 -, 2 2, 1 1, 2 -, 3 -, 3 -, 2 -, 2 2, 1 1, 2 1, 3 1, 4 -, 4 -, 4 -, 2 -, 2 1, 3 -, 4 -, 2 2, 2 -, 4 1, 3 |
1.6 2.2 1.8 1.6 1.7 2.6 2.0 1.9 2.4 2.3 2.4 1.7 2.3 2.5 3.0 2.3 2.3 2.4 3.4 2.4 3.3 3.2 5.8 3.2 3.0 4.0 3.5 3.9 4.8 |
Ballistic buttons
| Diameter (mm) | Part No. T38 thread | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 64 64 64 64 64 64 70 70 70 76 76 76 76 76 76 89 89 89 89 102 102 127 |
135-5064-67,49-20 135-5064-45-67,49-20 135-6064-67,49-20 135-6064-45-67,49-20 135-6064-21-67,49-20 135-6064-21-45-67,49-20 135-6070-67,49-20 135-6070-45-67,49-20 135-6070-21-67,49-20 135-5076-45-67,49-20 135-5076-21-67,49-20 135-6076-67,49-20 135-6076-45-67,49-20 135-6076-21-67,49-20 135-6076-21-45-67,49-20 135-5089-21-67,49-20 135-6089-67,49-20 135-6089-45-67,49-20 135-6089-21-67,49-20 135-5102-42-24-67,49-20* 135-6102-21-67,49-20 135-5127-42-24-67,49-20* |
12 12 10 10 10 10 10 10 10 12 13 10 13 13 13 14 11 14 13 17 13 19 |
8x10, 4x10 8x10, 4x10 6x11, 3x10,1x10 6x11, 3x10,1x10 6x12.7, 3x10,1x8 6x12.7, 3x10,1x8 6x11, 3x11,1x9 6x11, 3x11,1x9 6x12.7, 3x10,1x10 8x11, 4x11 8x12.7, 5x11 6x12.7, 3x11,1x11 8x11, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 6x12.7 6x12.7, 3x11,2x11 8x11, 4x11,2x9 8x12.7, 4x11,1x11 16x12.7, 1x12.7 8x14.5, 4x12.7,1x12.7 18x12.7, 1x12.7 |
40 40 35 35 25 25 35 35 35 40 35 35 35 35 35 35 35 35 35 35 35 35 |
-, 2 -, 2 -, 3 -, 3 -, 3 -, 3 -, 3 -, 3 -, 3 -, 2 1, 2 1, 3 1, 4 -, 4 -, 4 1, 2 1, 3 1, 4 -, 4 2, 2 -, 4 1, 3 |
1.6 2.2 1.8 2.6 1.8 2.2 1.9 2.3 1.7 3.1 2.3 2.4 3.5 2.4 3.3 3.1 3.4 5.0 3.0 3.5 3.9 5.2 |
Full-ballistic buttons(soft rock bits)
| Diameter (mm) | Part No. T38 thread | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 76 89 |
135-6076-21-66,49-20 135-6089-21-66,49-20 |
13 13 |
8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 |
35 35 |
-, 4 -, 4 |
2.5 3.0 |
Drill Bit: Cross-type bit
| Diameter (mm) | Part No. | Width | Height | Flushing hole (Side, Centre) | Weight approx (kg) |
| 84 | 135-7064,08-16 | 14.0 | 25.0 | 4, 1 | 1.9 |
Drill Bit: X-type bit
| Diameter (mm) | Part No. R38 thread | Part No. T38 thread | Width | Height | Flushing hole (Side, Centre) | Weight approx (kg) |
| 64 76 |
104-8076,08-16 |
135-8064,08-16 135-8076,08-16 |
14.0 14.0 |
25.0 26.0 |
4, 1 4, 1 |
1.9 2.5 |
Extension rod
| Length (mm) | Part No. R38 thread | Part No. T38 thread | Weight approx (kg) |
| 1220 3050 |
235-0512-C.02 235-0531-C.02 |
8.4 18.7 |
| Length (mm) | Part No. R38 thread | Part No. T38 thread | Weight approx (kg) |
| 915 1220 1525 1830 3050 3660 4270 4880 5530 |
235-4709-MF-C.02 235-4712-MF-C02 235-4715-MF-C02 235-4718-MF-C02 235-4731-MF-C02 235-4737-MF-C02 235-4743-MF-C02 235-4749-MF-C02 235-4755-MF-C02 |
8.3 10.9 13.3 15.8 25.5 30.5 35.4 41.9 46.9 |
Surface headened.
| Length (mm) | Part No. R38 thread | Part No. T38 thread | Weight approx (kg) |
| 1830 2435 3050 3660 3965 4270 |
204-2718-SH.03 204-2724-SH.03 204-2731-SH.03 204-2737-SH.03 |
235-2731-SH.03 235-2737-SH.03 235-2740-SH.03 235-2743-SH.03 |
14.8 19.5 24.3 30.0 32.5 33.9 |
Fully carburized.
| Length (mm) | Part No. R38 thread | Part No. T38 thread | Weight approx (kg) |
| 280 1220 1525 1830 3050 |
204-2702-C.02 |
235-2712-C02 235-2715-C02 235-2718-C02 235-2731-C02 |
2.0 10.0 12.5 14.4 24.0 |
| Length (mm) | Part No. R38 thread | Part No. T38 thread | Weight approx (kg) |
| 3050 3660 |
235-2731-95-SH.03 235-2737-95-SH.03 |
23.8 30.0 |
Drifter rod
For one rod drilling drifter rods can be used.Guide rod
| Length (mm) | Part No. t38 thread | Weight approx (kg) |
| 1830 3050 3660 |
235-4918-MF-C02 235-4931-MF-C02 235-4937-MF-C02 |
21.1 34.5 41.3 |
Guide tube
| Hole diameter (mm) | Tube diameter (mm) | Length | Part No. | Weight approx (kg) |
| 64 64 64 64 64 64 76 |
56 56 56 56 56 56 64 |
1220 1525 1830 3050 3660 4920 3660 |
235-7012,10 235-7015,10 235-7018,10 235-7031,10 235-7037,10 235-7049,10 235-6937,10 |
12.6 14.0 17.4 28.3 32.8 47.9 51.0 |
Coupling
| Diameter (mm) | Length (mm) | Part No. R38 thread | Part No. T38 thread | Weight approx (kg) |
| 55 55 |
170 190 |
304-0055,00 | 335-0055,00 |
1.7 1.9 |
T45(13/4")
Drill Bit: Button bit
Spherical buttons| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 70 70 70 70 76 76 76 76 76 76 76 76 76 89 89 89 89 89 89 89 89 102 102 102 102 102 102 115 115 127 152 |
136-5070,49-20 136-5070-21-45,49-20 136-6070,49-20 136-6070-45,49-20 136-5076,49-20 136-5076-45,49-20 136-5076-20,49-20 136-5076-21,49-20 136-5076-21-45,49-20 136-6076,49-20 136-6076-45,49-20 136-6076-21,49-20 136-6076-21-45,49-20 136-5089,49-20 136-5089-20,49-20 136-5089-45,49-20 136-5089-21-45,49-20 136-6089,49-20 136-6089-45,49-20 136-6089-21,49-20 136-6089-21-45,49-20 136-5102,49-20 136-5102-45,49-20 136-5102-21,49-20 136-6102,49-20 136-6102-45,49-20 136-6102-21,49-20 136-5115,49-20 136-6115,49-20 136-5127-42-24,49-20* 136-5152-42-24,49-20* |
12 11 10 10 12 12 11 13 13 10 13 13 13 12 14 12 14 11 14 13 13 12 12 14 11 14 13 18 14 19 20 |
8x11, 4x11 6x12.7, 5x10 6x11, 3x11,1x9 6x11, 3x11,1x9 8x11, 4x11 8x11, 4x11 6x12.7, 5x11 8x12.7, 5x11 8x12.7, 5x11 6x12.7, 3x11,1x11 8x11, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 4x12.7 8x12.7, 6x11 8x12.7, 4x12.7 8x12.7, 6x12.7 6x12.7, 3x11,2x11 8x11, 4x11,2x9 8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 8x14.5, 4x14.5 8x14.5, 4x14.5 8x15.8, 6x12.7 6x14.5, 3x12.7,2x12.7 8x12.7, 4x12.7,2x12.7 8x14.5, 4x12.7,1x12.7 10x12.7, 8x12.7 8x14.5, 4x12.7,2x12,7 18x12.7, 1x12.7 18x14.5, 2x14.5 |
40 35 35 35 40 40 35 35 35 35 35 35 35 40 35 40 35 35 35 35 35 40 40 35 35 35 35 35 35 35 35 |
-, 2 1, 2 -, 3 -, 3 -, 2 -, 2 2, 1 1, 2 1, 2 1, 2 1, 4 -, 4 -, 4 -, 2 1, 1 -, 2 1, 2 1, 3 1, 4 -, 4 -, 4 -, 2 -, 2 1, 2 1, 3 1, 4 -, 4 -, 2 1, 4 1, 3 1, 3 |
2.2 2.2 2.0 2.1 2.2 2.8 2.6 2.4 2.7 2.6 3.2 2.4 3.0 3.3 3.7 5.0 4.7 3.5 4.7 3.0 4.2 4.4 6.7 3.7 3.9 6.9 5.3 5.4 5.0 5.3 9.9 |
Ballistic buttons
| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge, Front) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 70 76 76 76 76 76 76 89 89 89 89 89 89 102 102 102 127 152 |
136-6070-67,49-20 136-5076-45-67,49-20 136-5076-21-67,49-20 136-6076-67,49-20 136-6076-45-67,49-20 136-6076-21-67,49-20 136-6076-21-45-67,49-20 136-5089-45-67,49-20 136-5089-21-67,49-20 136-5089-21-45-67,49-20 136-6089-67,49-20 136-6089-45-67,49-20 136-6089-21-45-67,49-20 136-5102-21-67,49-20 136-6102-67,49-20 136-6102-45-67,49-20 136-5127-42-24-67,49-20* 136-5152-42-24-67,49-20* |
10 12 13 10 13 13 13 12 14 14 11 14 13 14 11 14 19 20 |
6x11, 3x11,1x9 8x11, 4x11 8x12.7, 5x11 6x12.7, 3x11,1x11 8x11, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 8x12.7, 4x12.7 8x12.7, 6x12.7 8x12.7, 6x12.7 6x12.7, 3x11,2x11 8x11, 4x11,2x9 8x12.7, 4x11,1x11 8x15.8, 6x12.7 6x14.5, 3x12.7,2x12.7 8x12.7, 4x12.7,2x12.7 18x12.7, 1x12.7 18x14.5, 2x14.5 |
35 40 35 35 35 35 35 40 35 35 35 35 35 35 35 35 35 35 |
-, 3 -, 2 1, 2 1, 2 1, 4 -, 4 -, 4 -, 2 1, 2 1, 2 1, 3 1, 4 -, 4 1, 2 1, 3 1, 4 1, 3 3, 3 |
2.6 2.8 2.3 2.6 3.1 2.5 3.0 5.0 3.3 4.7 3.4 4.8 4.8 3.7 3.9 6.9 5.3 9.5 |
Extension rod
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 3050 3660 |
236-0731-C02 236-0737-C02 |
25.6 30.8 |
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 3050 3660 4270 6095 |
236-2931-SH.03 236-2937-SH.03 236-2943-SH.03 236-2961-SH.03 |
33.3 39.9 46.7 68.9 |
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 1525 1830 3050 3660 4270 6095 |
236-4915-MF-C02 236-4918-MF-C02 236-4931-MF-C02 236-4937-MF-C02 236-4943-MF-C02 236-4961-MF-C02 |
18.2 21.5 34.7 41.6 49.0 69.0 |
Guide rod
| Length (mm) | Part No. | Weight approx (kg) |
| 3660 | 236-5137-MF-C02 | 55.0 |
Guide tube
| Hole diameter (mm) | Tube diameter (mm) | Length | Part No. | Weight approx (kg) |
| 76 76 76 76 89 89 |
64 64 64 64 76 76 |
1220 1525 1830 3660 1830 3660 |
236-6912,10 236-6915,10 236-6918,10 236-6937,10 236-6618,10 236-6637,10 |
20.0 21.6 25.4 49.0 40.0 77.8 |
Coupling
| Diameter (mm) | Length (mm) | Part No. | Weight approx (kg) |
| 63 66 |
210 210 |
336-0063,00 336-0066,00 |
2.7 3.2 |
T51 (2")
Drill Bit: Button bit
Spherical buttons| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 89 89 89 89 89 89 89 89 89 102 102 102 102 102 102 102 102 115 115 115 115 115 115 115 127 127 127 127 127 127 152 |
137-5089,49-20 137-5089-45,49-20 137-5089-20,49-20 137-5089-21,49-20 137-5089-21-45,49-20 137-6089,49-20 137-6089-45,49-20 137-6089-21,49-20 137-6089-21-45,49-20 137-5102,49-20 137-5102-45,49-20 137-5102-21,49-20 137-5102-21-45,49-20 137-6102,49-20 137-6102-45,49-20 137-6102-21,49-20 137-6102-21-45,49-20 137-5115-20,49-20 137-5115-20-45,49-20 137-5115-21,49-20 137-6115,49-20 137-6115-45,49-20 137-6115-21,49-20v137-6115-21-45,49-20 137-5127,49-20 137-5127-21,49-20 137-6127,49-20 137-6127-45,49-20 137-6127-21,49-20 137-6127-21-45,49-20 137-5152-42-24,49-20* |
12 12 14 14 14 11 14 13 13 12 12 14 14 11 14 13 13 17 17 14 14 14 14 16 21 16 16 16 14 14 20 |
8x12.7, 4x12.7 8x12.7, 4x12.7 8x12.7, 6x11 8x12.7, 6x12.7 8x12.7, 6x12.7 6x12.7, 3x11,2x11 8x11, 4x11,2x9 8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 8x14.5, 4x14.5 8x14.5, 4x14.5 8x15.8, 6x12.7 8x15.8, 6x12.7 6x14.5, 3x12.7,2x12.7 8x12.7, 4x12.7,2x12.7 8x14.5, 4x12.7,1x12.7 8x14.5, 4x12.7,1x12.7 9x14.5, 8x12.7 9x14.5, 8x12.7 8x15.8, 6x14.5 8x14.5, 4x12.7,2x12.7 8x14.5, 4x12.7,2x12.7 8x15.8, 4x14.5,2x14.5 9x14.5, 6x14.5,1x14.5 12x12.7, 9x12.7 8x15.8, 8x14.5 8x14.5, 4x14.5,4x11 8x14.5, 4x14.5,4x11 8x15.8, 4x15.8,2x12.7 8x15.8, 4x15.8,2x12.7 18x14.5, 2x14.5 |
40 40 35 35 35 35 35 35 35 40 40 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 |
-, 2 -, 2 1, 1 1, 2 1, 2 1, 3 1, 4 -, 4 -, 4 -, 2 -, 2 1, 2 1, 2 1, 3 1, 4 -, 4 -, 4 2, 1 2, 1 1, 2 1, 4 1, 4 -, 4 -, 3 -, 2 1, 2 1, 4 1, 4 -, 4 -, 4 1, 3 |
3.5 4.8 4.0 3.7 5.3 3.6 4.7 3.5 4.9 4.8 7.1 5.1 6.9 5.1 7.2 5.3 7.2 .7 9.8 6.1 5.8 9.5 6.0 9.7 6.8 6.8 6.8 11.2 7.7 11.0 10.0 |
Ballistic buttons
| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 89 89 89 89 89 102 102 102 102 102 115 115 152 |
137-5089-21-67,49-20 137-5089-21-45-67,49-20 137-6089-45-67,49-20 137-6089-21-67,49-20 137-6089-21-45-67,49-20 137-5102-21-67,49-20 137-5102-21-45-67,49-20 137-6102-67,49-20 137-6102-45-67,49-20 137-6102-21-67,49-20 137-5115-21-67,49-20 137-6115-67,49-20 137-5152-42-24-67,49-20* |
14 14 14 13 13 14 14 11 14 13 14 14 20 |
8x12.7, 6x12.7 8x12.7, 6x12.7 8x11, 4x11,2x9 8x12.7, 4x11,1x11 8x12.7, 4x11,1x11 8x15.8, 6x12.7 8x15.8, 6x12.7 6x14.5, 3x12.7,2x12.7 8x12.7, 4x12.7,2x12.7 8x14.5, 4x12.7,1x12.7 8x15.8, 6x12.7 8x14.5, 4x12.7,2x12.7 18x14.5, 2x14.5 |
35 35 35 35 35 35 35 35 35 35 35 35 35 |
1, 2 1, 2 1, 4 -, 4 -, 4 1, 2 1, 2 1, 3 1, 4 -, 4 1, 2 1, 4 1, 3 |
3.7 5.3 4.7 3.6 4.9 5.1 7.0 5.2 7.2 5.2 6.1 5.8 9.5 |
Full-ballistic buttons
| Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| 127 | 137-5127-47-66,49-20 | 14 | 8x15.8, 6x15.8 | 35 | -, 4 | 8.0 |
Extension rod
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 3660 6095 |
237-3137-SH.03 237-3161-SH.03 |
52.3 84.0 |
| Length (mm) | Part No. Fully carburized. | Part No. Surface headened | Weight approx (kg) |
| 1830 3660 4270 6095 |
237-5118-MF-C02 237-5137-MF-C02 237-5143-MF-C02 237-5161-MF-C02 |
27.5 51.8 64.0 85.6 |
Guide tube
| Hole diameter (mm) | Tube diameter (mm) | Length | Part No. | Weight approx (kg) |
| 89 89 102 |
76 76 87 |
1830 3660 3660 |
237-6618,10 237-6637,10 237-6837,10* |
40.0 79.1 80.0 |
Coupling
| Diameter (mm) | Length (mm) | Part No. | Weight approx (kg) |
| 72 77 |
235 235 |
337-0072,00 337-0077,00 |
4.0 4.3 |
Tube drilling system
Drill Bit: Button bit
Spherical buttons| System | Thread | Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| TDS76 | ST 58 | 89 95 102 152 |
151-5089-21,49-20 151-6095-21-35,49-20 151-5102-21,49-20 151-5152-42-24,49-20* |
14 13 14 21 |
8x12.7, 6x12.7 8x14.5, 4x12.7,1x11 8x15.8, 6x12.7 18x14.5, 3x14.5 |
35 35 35 35 |
1, 2 -, 4 1, 2 3, 3 |
4.0 4.1 5.3 10.4 |
| System | Thread | Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| TDS87 | ST 68 | 102 115 127 140 152 152 |
152-5102-21,49-20 152-5115-21,49-20 152-5127-21,49-20 152-5140-21,49-20 152-5152-21,49-20 152-5152-42-24,49-20* |
14 14 17 17 18 21 |
8x15.8, 6x12.7 8x16, 6x14.5 8x15.8, 9x14.5 8x15.8, 9x14.5 8x15.8, 10x14.5 18x14.5, 3x14.5 |
35 35 35 35 35 35 |
1, 2 1, 2 1, 2 1, 2 1, 2 3, 3 |
5.5 6.2 6.9 10.0 11.8 11.8 |
Ballistic buttons
| System | Thread | Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| TDS76 | ST58 | 89 89 |
151-6089-21-36-67,49-20 151-6089-35-67,49-20 |
13 17 |
8x12.7, 4x11,1x11 10x11, 6x11,1x11 |
35 35 |
-, 4 -, 4 |
4.3 4.1 |
| System | Thread | Diameter (mm) | Part No. | No. of buttons | Buttons x button diameter (Gauge, Centre) | Buttons angle ° (Gauge) | Flushing hole (Side, Centre) | Weight approx (kg) |
| TDS87 | ST 68 | 102 102 105 115 115 115 200 |
152-5102-21-67,49-20 152-6102-67,49-20 152-6105-35-67,49-20 152-5115-21-67,49-20 152-6115-21-35-67,49-20 152-6115-35-67,49-20 152-5200-42-67,49-20** |
14 14 18 14 17 18 24 |
8x15.8, 6x12.7 8x12.7, 4x12.7,2x12.7 10x12.7, 6x12.7,2x12.7 8x16, 6x14.5 9x14.5, 6x14.5,2x14.5 10x12.7, 6x12.7,2x12.7 22x15.8, 2x14.5 |
35 35 35 35 35 35 35 |
1, 2 1, 4 -, 4 1, 2 -, 3 -, 4 -, 4 |
5.5 5.0 5.4 5.8 7.2 7.2 15.9 |
Guide tube R32-T51 thread
Rope/T thread, male/female
T thread, female/female, -36, -37
Drill tube
ST58, ST68 thread
TDS 76 with T 45 and T 51 thread: Without wrench flat.
TDS 76 with ST 58 thread: Wrench flat in female end only.
TDS 87 with ST 68 thread: Wrench flat in female end only.
| System | Thread | Length | Part No. | Outer diameter (mm) | Flushing hole diameter (mm) | Weight approx (kg) |
| TDS45 | R32 | 1220 1525 1830 3050 |
203-7112,10 203 7115,10 203 7118,10 203 7131,10 |
45 45 45 45 |
10 10 10 10 |
10.0 12.5 14.2 23.4 |
| TDS56 | T38 | 1220 1525 1830 3050 3660 4920 |
235 7012,10 235 7015,10 235 7018,10 235 7031,10 235 7037,10 235 7049,10 |
56 56 56 56 56 56 |
16 16 16 16 16 16 |
12.6 14.0 17.4 28.3 32.8 47.9 |
| TDS64 | T38 | 3660 | 235 6937,10 | 64 | 18 | 51.0 |
| TDS64 | T45 | 1220 1525 1830 1830 1830 3050 3660 |
236 6912,10 236 6915,10 236 6918,10 236 6918-36,10** 236 6918-87,10 236 6931-86,10 236 6937,10 |
64 64 64 64 64 64 64 |
18 18 18 18 18 20 18 |
20.0 21.6 25.4 27.6 26.0 41.7 549.0 |
| TDS76 | T45 | 1830 3050 3660 |
236 6618,10 236 6631-36,10** 236 6637,10 |
76 76 76 |
18 18 18 |
40.0 51.7 77.8 |
| TDS76 | T51 | 1525 1830 3660 3660 |
237 6615,10 237 6618,10 237 6637,10 237 6637-37,10** |
76 76 76 76 |
22 22 22 22 |
31.0 40.0 79.1 81.2 |
| TDS76 | ST 58 | 1525 1830 1830 3660 |
251 6615,10 251 6618,10 251 6618-88,10* 251 6637,10 |
76 76 76 76 |
24 24 24 24 |
34.0 40.0 40.0 76.3 |
| TDS87 | ST 68 | 1525 1830 1830 3660 6100 |
252 6815,10 252 6818,10 252 6818-88,10* 252 6837,10 252 6861,10 |
87 87 87 87 87 |
38 38 38 38 36 |
35.5 41.6 43.8 80.0 133.0 |
Rod Adapter
To be used together with female/female guide tube. Fully carburized.
| Length (mm) | Thread | Part No. | Weight approx (kg) |
| 220 250 |
T45 T51 |
236-4902-C00 237-5102-C00 |
1.9 2.7 |
Crossover adapter
| System | Thread | Thread A | Thread B | Length (mm) | Part No. | Outer diameter (mm) | Weight approx (kg) |
| TDS87 | ST 68 | FI45 | ST 68 | 265 | 336-2087-52,10 | 87 | 6.6 |
